![]() The management IP will also be used to make connections to RADIUS servers and any additional management systems for things like SNMP and syslog. Each Aerohive AP will have its own management IP, which will be used to talk to HiveManager, as well as any other Aerohive APs on the network. If you don’t already have one, you will want to create another VLAN for management purposes. You probably already have VLANs set aside for your various types of traffic. The flexibility of the Aerohive solution allows to you be very granular with which traffic is tunneled and which traffic is switched locally. Notice that it is particular users and not an entire SSID. The Aerohive solution allows you to pick and choose which users need to be tunneled over the network to a particular location. Should you have some sort of requirement to tunnel traffic back to a central location for things like guest access, fear not. If your only experience has been with controllers that were only configured with centralized forwarding, an Aerohive deployment is going to look a lot different as you will move from using access or single VLAN switch ports to using 802.1q trunk ports. If you have experience with wireless vendors that use local forwarding from each AP, then you are already accustomed to having APs connected to switch ports configured as 802.1q links/trunks. Configuration between the 3 different models is relatively the same. Although there are 3 different deployment options for HiveManager(public cloud, private cloud, single VM), this post utilizes the public cloud option. It is also worth noting that this post utilizes the public cloud/Internet option for HiveManager. However, the nature of the rapid pace at which HiveManager is updated means that things could change that alter the configuration flow. At the time of publishing(December 2018), these are the steps needed to put in AP into operation. Rather, it is meant to be a starting point in which the reader is introduced to the overall configuration mechanisms within HiveManager at a high level. This post is not meant to be an exhaustive reference, as there are MANY things that can be configured. This post is meant to serve as a starting point to take that AP and put some configuration on it so that you can start connecting clients. If you have never dealt with Aerohive before from a wireless perspective, you might be asking yourself how to configure the AP. Whether through a purchase or demo gear, you have your hands on an Aerohive AP.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |